Flame Spraying Equipment

The Flamespray process (combustion spray/flame spray) uses a single wire, cord or powder, which is melted in an oxygen-fuel gas flame. The raw material can be metal (wire flame spraying or molten metal flame spraying), ceramic or plastic making the flame spray process very versatile in its applications.

Applications:

• Anti-corrosive coating of structural steel
• Corrosion under insulation (CUI) in petro chemical plants

METALLISATION MK73

The Metallisation MK73 offers a choice of continuous spray or stop/start. Simple to operate and having a high throughput it out sprays its competitors. The MK73 can also be used with smaller diameter wires for fine work and is fitted with a spray system spreader.

See the Mk73 in action on our videos page.

See the Flamespray Extension in action on our videos page.

METALLISATION MK66E

The Metallisation MK66E Flamespray system can be used a fully integrated automatic system or as a manually lit Flamespray pistol with an auxillary motor controller. The motor controller can be operated in two ways, either manually from the controller itself or remotely from an auxillary control system. The drive is capable of feeding wires with diameters ranging from 1mm to 5mm without changing gearbox parts. The system can be set up for wire speed ranging from 0.25 to 6m / minute

SPRAYJET-88 (12E Type)

General purpose oxy-fuel wire spray guns capable of spraying all available metallic wires like zinc, aluminium, steel, stainless steel, copper, molybdenum and various alloys. SPRAYJET-98 (14E Type) This new spray gun has a thumb-operated wire feed control, for starting and stopping the wire. All other features of Sprayjet-88 are also incorporated. This gun can be converted to Sprayjet-98-HS by changing gears and shaft.