MSSA stock a wide range of powders suited for use with Laser Cladding Equipment.
The list below details a selection of the range of Laser Cladding powders available. If the powder you are searching for is not listed, please contact us with your enquiry as in most cases we will be able to source it for you.
| Powder Name | Description | Approx. Hardness | Applications |
| MSSA 276 | Nickel-based | 25 HRC | Marine, Aerospace, Processing, Nuclear Reactors, Control Equipment |
| MSSA 25 | Nickel-based | 30 HRC | Steel industry – Ingot transporter rollers in hot mills, pickle lines and cold mills, oil & gas – drill bits, pumps. |
| MSSA 33 | Nickel-based | 36 HRC | |
| MSSA 33-FTC | Nickel-based | 36 Matrix | Same as above with the addition of tungsten carbide where higher abrasion resistance is required. |
| MSSA 52M | Nickel-based | 47 HRC | Oil & gas, petroleum – pump shafts, drill stabilisers, Waste to energy – super heaters, boiler tubes and panels. |
| MSSA 88 | Nickel-based | 59-64 HRC | Waste to energy – super heaters, boiler tubes and panels. |
| MSSA 625 | Nickel-based | 97 HRB (nominal) | Marine, Aerospace, Processing, Nuclear Reactors, Control Equipment, Buffer Layer for Non-Magnetic |
| MSSA 6 | Cobalt-based | 38-44 HRC | Hot shear knives and blades, hot trim dies, pump shafts and bearings, erosion shields, heat shields, valve seats and gates. |
| MSSA 40 | Cobalt-based | 40-47 HRC | Sprayable alternative to MSSA 6, having the self-fluxing attribute which enables coatings to be fused, even in air. Good hard-surfacing choice where chemical or atmospheric corrosion is accompanied by metal on metal wear and/or impact. |
| MSSA 12 | Cobalt-based` | 45 – 50 HRC | Textile and Carpet industries – cutting edges of blades; Timber Industry – saw tips; Engine valves |
| MSSA 1 | Cobalt-based | 50 – 55 HRC | Bushings, knives, cams, seal rings, wear pads |
| MSSA 50 | Cobalt-based | 56 – 61 HRC | MSSA 50 is a self-fluxing, sprayable cobalt alloy powder with excellent corrosion and abrasion resistance. It is considered a suitable alternative to MSSA 1. |
Related Metal Spray Consumables
You may also be interested in our Metal Spray Flexicord.
For more information, call us on 07 3823 1004, or contact us using our Contact Form.